Wear the "F's" of yesteryear: CB1100 Custom

WITH ME's CB1100

Many fans want to give Honda's current air-cooled model CB1100/EX/RS a classic CB1100F look. Project F is a CB full customization service provided by WITH ME to meet such requirements. The image depicts a Project F+ with advanced customization.

The SC65 engine is retained, but the air cleaner is removed and a performance chip is incorporated. These modification and r's gear silencer realized 106.5ps output. This bike is capable of smooth acceleration up to high rpm without losing stability at low rpms, and the performance is better to allow the rider to enjoy the ride from street to track racing. The rear shocks are by BILS. A special CB1100F-like exterior kit is also provided, including an aluminum 16.5L tank and FRP side and seat cowls. All necessary fittings and wiring are arranged on the kit parts beforehand. This is an ambitious work that aims to achieve the feeling of the CBF on the current models.

Electrical

The distinctive long, narrow black case of the CB1100F's blinkers, as well as the headlight and the two horns directly below, have been reproduced to express the CBF's unique features.

Bodyworks

The large, square tail lens, a characteristic of the CB1100F, is also properly represented. The rear fender is removed.

The fuel tank is made of aluminum and has a capacity of 16.5L, projecting the slim and long look of the CBF onto the CB1100. It comes in the stock color.

The seat is based on the original CB1100 (SC65). The tail cowl and side covers are also sculpted FRP to fit the CB1100F shape of the CB1100.

Engine

The hardware of the CBF, such as the air-cooled DOHC 4-valve inline 4-cylinder 1140cc engine and double cradle frame, is identical to that of the CB1100, but it has a finish that does not look out of place.

In F+ version, the air cleaner box is removed and uses a RapidBike performance chip to control the fuel.

Chassis

The front and rear 18-inch wheels and Φ41mm (Φ43mm on the CB1100RS) front forks are also retained. This model is also equipped with Technix TASC cartridge inside the fork.

This F+ model bike is also equipped with BILS rear shocks with independent reservoirs, as an example of customization. The square and slender swingarm is retained, as well as the irregular 10-spoke wheels, but it looks like Comstar design of CBF.

Intake & Exhaust

A megaphone-shaped 4-2-1 exhaust reminiscent of the AMA Superbike racers of the CB1100F era is also installed.

Gallery

Specifications

Original Source of this Article

Heritage & Legends