Enjoy & expand the possibilities of on/off road: Z900RS parts by ARCHI/YSS

PMC's displays at the Tokyo Motorcycle Show 2023 were spread out over three booths. Among them, the ARCHI booth showed two types of Z900RS customs.

The latest parts in pursuit of beauty and functionality

PMC is known for their replacement parts for classic bikes, but in 2020 they established ARCHI, a custom parts brand for current bike models. At the 2023 Motorcycle Show they displayed two different Z900RS customs. The Red Jewel version recreates the atmosphere of the air-cooled Z of yesteryear with its streamlined tail cowl, straight steel exhaust that was the standard in the '70s, and newly developed finned covers around the engine area. The Blue Satellite, on the other hand, incorporates a large-diameter slash megaphone silencer and a bikini cowl and undercowl that are reminiscent of the '80s AMA superbike racers. Both bikes use many of ARCHI's after-market products!

New raised steering damper! Z900RS "Blue Satellite" 2023

The new slash megaphone exhaust has the end part cut at an angle by 3D processing. A raised steering damper is also installed. In addition to the regular version equipped on the Red Jewel, a new version with the ARCHI logo, which is installed on the Blue Satellite, is now available!

More choices for the tail area! ARCHI is the place to go for Z specs and standard parts!

The powerful short pipe exhaust, consisting of 6 pieces based on a 42.7mm diameter exhaust pipe, is now available for the '23 model Z900RS. The YSS steering damper kit is also installed on this bike, which is designed to be attached to the handlebar clamps using a bracket specially designed for the model. The front caliper duct is a functional cooling part used for racing in recent years, with twill weave carbon material made by Toray decorating the bottom of the fork.

Billet honeycomb parts to enhance and dress up the Z900RS

The billet honeycomb series is boldly machined from solid aluminum with a hexagonal design on the surface. The Z900RS can be decorated even more beautifully by using them as a set.

Z900RS "YSS ARCHI Racing" 2023

This Z900RS racer was the solo run winner of the newly established Taste of Tsukuba (T.O.T.) Streetfighter class last spring, and uses a lot of ARCHI and YSS parts.

Z1 revived with full restoration technology

PMC produces a wide range of parts for classic bikes, mainly for the Z1/Z2. For the Z1, they sell a huge number of replacement parts, from exterior parts, including fuel tanks, to internal engine parts.

Full suspension color lineup for off-road beginners

YSS plans to be more active in the off-road field, including enduro racing. For front forks, they offer an upgrade kit with a PD valve that provides flexibility as well as stiffness, and the rear is an MX366 with 30 levels of rebound damping force adjustment.

MG-series MG456/366/362
MR-series MR456
MS-series MS456/366/362
MX-series MX456/366/362

*456 = piston diameter 45mm, shaft diameter 16mm, 366 = piston diameter 36mm, shaft diameter 16mm, 362 = piston diameter 36mm, shaft diameter 12mm

Original Source

Provided by PMC