Protecting the Body of the Cygnus X (7th Gen): An Overview of R2 SpeedTek's "CYG-CPK" Protectors and "CYG-SFW" Side Fins

The Cygnus series, known in Taiwan as the "Jingzhan" (勁戦), has been the star of Taiwan's scooter custom scene for many years. While the lines on the side of the body are sharp, they are also the most prone to damage, whether from being pushed against other vehicles while parked or from scrapes during maneuvering.

R2 SpeedTek has launched a protection series for the 7th generation Cygnus X (Taiwanese name: 7th Gen Jingzhan) and Cygnus XR, covering the lower floor, footrest area, tail cowl, and even wind-deflecting fins around the knees. The "stick-on" installation method allows for mounting without damaging the body, blending the protection into the original lines without the need for drilling, and it does not affect vehicle inspections (in Taiwan).

This article summarizes the detailed specifications of R2 SpeedTek's "CYG-CPK" protectors and the "CYG-SFW" side fin wind deflector touring kit, helping you understand the differences between the full set and individual components (by mounting position).

Choose Between a 4-Piece Full Set or Pinpoint Reinforcement Based on Your Protection Needs

The greatest appeal of the CYG-CPK protector is the flexibility to purchase either a "full set" or "individual mounting positions." The 4-piece full set covers the front and rear of the lower floor, the upper step, and the tail cowl trim—four areas prone to damage—making it ideal for owners who want to finish the bike right after delivery.

If you only tend to scrape specific areas, you can choose to reinforce only 1 or 2 spots out of positions A through D, without needing to replace the entire set. This modular approach is the biggest difference between this protection series and standard set-type cowl protection films.

R2 SpeedTek Custom Parts for Cygnus X: Full Lineup of Protectors and Side Fins

R2 SpeedTek | CYG-CPK Protector for Cygnus X (4-Piece Full Set)

Covers the four major damage areas: front and rear of the lower floor, upper step, and tail cowl trim. With a matte texture and high-grade dedicated adhesive, it can be attached without damaging the body. While no drilling is required, reinforcement points for screw-fastening are also provided.

Designed to match the areas of the Cygnus X body most prone to damage, this 4-piece set covers spots susceptible to scrapes during parking or maneuvering. The material is weather-resistant and scratch-resistant, with a special micro-blast finish on the surface to create a texture reminiscent of honeycomb air intakes.

Because it blends discreetly into the lines of the original cowl, it is barely noticeable as an aftermarket part from a distance, but adds a combative atmosphere when viewed up close. Installation is done using high-grade dedicated adhesive, allowing it to be attached without damaging the body or the paint surface through drilling. Furthermore, for owners who want a more secure fit, reinforcement points for screw-fastening are also provided.

The adhesive itself is UV-resistant and peel-resistant, so it will not degrade or fall off even after long-term exposure to sunlight. The structure is compact, does not protrude outward, and does not change the vehicle's dimensions, so there is no need to worry about vehicle inspections.

[Part Number] CYG-CPK-SET

R2 SpeedTek | CYG-CPK Protector for Cygnus X: Position A (Left and Right Front Floor)

Pinpoint reinforcement for the easily scraped sides of the front floor. The material and installation method are the same as the full set.

If you want to prioritize protecting the sides of the front floor, which are most prone to scraping during maneuvering or getting on and off the bike, you can purchase Position A individually. Like the full set, it features a matte texture and uses UV-resistant, peel-resistant dedicated adhesive, allowing for installation without damaging the body or drilling.

[Part Number] CYG-CPK-A

R2 SpeedTek | CYG-CPK Protector for Cygnus X: Position B (Left and Right in Front of Tandem Step)

Pinpoint reinforcement for the left and right sides in front of the tandem step. The material and installation method are the same as the full set.

The areas in front of the tandem steps are prone to hitting other vehicles or walls when parked. Position B is specialized for this area, and the installation method is the same as the full set: a stick-on method that does not damage the body.

[Part Number] CYG-CPK-B

R2 SpeedTek | CYG-CPK Protector for Cygnus X: Position C (Left and Right Above Tandem Step)

Pinpoint reinforcement for scratches that easily form above the tandem steps. Adopts the same matte texture and installation method as the full set.

Position C targets the areas above the tandem steps, where scratches from maneuvering or parking on the side stand are most visible. By reinforcing this area individually, you can achieve both protection and aesthetic beauty.

[Part Number] CYG-CPK-C

R2 SpeedTek | CYG-CPK Protector for Cygnus X: Position D (Left and Right Behind Grab Bar)

Pinpoint reinforcement for the left and right sides behind the grab bar. Recommended for owners who often have others help support the bike or who find it gets scratched during loading and unloading of luggage.

Position D is designed for the left and right sides behind the grab bar. This area is prone to scratches when maneuvering, when others apply force to support the bike, or when a tandem rider gets on or off, making it suitable for individual reinforcement.

[Part Number] CYG-CPK-D

R2 SpeedTek | CYG-SFW Side Fin Wind Deflector Touring Kit for Cygnus X

Reduces wind hitting the knees with a hollowed-out airflow design. All corners are rounded for safety, and it can be installed without drilling using reinforced 3M double-sided tape.

CYG-SFW is a side fin designed with the motif of heat-dissipating fins of creatures from sci-fi. The hollowed-out, streamlined form fits perfectly with the Cygnus X's body lines, guiding airflow to soften the wind hitting the knee area. It is a practical part that provides noticeable fatigue reduction during long-distance rides and is useful for customs that prioritize comfort.

Considering rider safety, all corners have been rounded to prevent snagging or injury in the event of an accident. Installation is fixed using reinforced 3M double-sided tape for vehicle use, which has high adhesion and also provides basic vibration absorption. This also does not require drilling holes in the body.

[Part Number] CYG-SFW

To Gallery (20)