TẠI SAO ?

CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN

COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI

DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ

* Cửa hàng TỐT NHẤTDUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản.
* Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác!
* Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.

HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!

Chúc mừng bạn! Tài khoản mới của bạn đã được tạo! Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi. Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.

Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.

Đăng ký xe máy của bạn để gia nhập Webiker!
Về dịch vụ "Góc Webiker" của chúng tôi
"TÌM KIẾM DỄ DÀNG"
Bạn có thể tìm kiếm những mặt hàng phù hợp với xe máy của bạn một cách dễ dàng!
"THÔNG TIN CÓ GIÁ TRỊ"
Bạn có thể nhận được những thông tin có giá trị,
ví dụ như: giảm giá đặc biệt, những sản phẩm mới và hơn thế nữa!
"ĐĂNG KÝ DỄ DÀNG"
Bạn có thể đăng ký một cách dễ dàng! Chỉ cần thông tin của
nhà sản xuất xe máy, tên và năm của đời xe!
Tất cả điều kiện
1,241 Đánh giá Xem dạng:
  • MỚI
    Phù hợp:
    • YAMAHA MT-01 05 For front use
    • HONDA CB1300SUPER BOLDOR 05-10|12|14-16 For front use
    • KAWASAKI ZZR1400 (ZX-14) 06|08 For front use
    • BMW FJR1300 01|03 For front use
    • SUZUKI BT1100BT1100 BULLDOG 02 For front use
    • ...và hơn thế nữa.
    Bởi Ivan04ka (2)TừBelarus
    Hello . I want to share a review about the product I bought. I bought myself a back wheel Michelin Pilot Power 3 120/70 . After a short period of operation, I can say: - the rubber quickly heats up, u...Đọc thêm
  • MỚI
    Phù hợp:
    • SUZUKI Introduder 800 (93. 5-) VS 52 C necessary number : Two
    • HONDA Introduder VS 1400 GL / GLP (86-) VX 51 L Required number : Two
    • KTM VX800 (90. 9 -) VS 51 A Required number : 4
    • KAWASAKI LS650 (86-) NP 41 A Required number : One
    • YAMAHA VS 800 VS 52 C Required number : Two
    • ...và hơn thế nữa.
    đăng Nov 14, 2017How nice!
    I took 11,500? This time and replaced it for the first Iridium plugs.I removed the Seat, lifted the tank and worked, but it took around 20 minutes.After installing the Plug, when I hung the Engine, Id...Đọc thêm
  • MỚI
    Phù hợp:
    • KAWASAKI ZXR750 91-92
    • SUZUKI 1400GTR 08-09
    • YAMAHA VERSYS1000 [Verses] 12
    • HONDA KX125 91-95
    • ZX-12R 01-06
    • ...và hơn thế nữa.
    I bought it for KLX 250 but the thickness of Seal is thicker than OEM. Therefore, because Clip does not stick, I gave up the wearing. That's too bad.Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB400SS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • KAWASAKI CB1300SF 03-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • SUZUKI CB750 (RC42) 04- * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • YAMAHA ESTRELLA [Estrea] RS Custom 96-99 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB1300SB 05-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    đăng Nov 12, 2017This is the limit.
    Since it was 163 cm and Small handle, I felt Handlebar was a bit far and low, so I exchanged it. Harness and Wire had plenty of time, but since Brake hose was feeling Limit even at NORMAL, I searched ...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB900F (All Years)
    • KAWASAKI CB500T (All Years)
    • SUZUKI CB400SF (All Years)
    • YAMAHA CB500Four (All Years)
    • CB1100 (All Years)
    • ...và hơn thế nữa.
    đăng Nov 10, 2017I think it's good.
    Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.Minus surface : Grip becomes thick (About Grip heater in...Đọc thêm
  • MỚI
    Phù hợp:
    • TRIUMPH America / LT (13-) Required number : Two
    • SUZUKI Tiger (01-) Required number : 3
    • KAWASAKI Speedmaster (11-) Required number : Two
    • HONDA Sulakston (04-) Required number : Two
    • KTM Sprint ST / RS (99-01) Required number : 3
    • ...và hơn thế nữa.
    đăng Nov 10, 2017enough
    It is enough just as usual to use Motorcycle, so it is just as adequate as attached to Manufacturer's shipment.I tried windshield IRIDIUM and so on in the past but I am insensitive, so it seems li...Đọc thêm
  • MỚI
    Phù hợp:
    • DUCATI Scrambler Sixty2 2016
    • HONDA Monster 1200 R 2016 (WCX0/WCX1) 2016
    • BMW Monster 1200 R 2017 (ZR900B) 2017
    • APRILIA Hypermotard 939 2017
    • YAMAHA Monster 1200 2017
    • ...và hơn thế nữa.
    đăng Nov 8, 2017PROTECT Universal Mirror.
    Bởi Kamsani1028 (2)TừSingapore
    Good branded and perfect mirror for my bike.Image are clear when bike go at high speed.I have ordered 2 more for my spare.I like the orange striking colour that makes my bike to be seen by other at ni...Đọc thêm
  • MỚI
    Phù hợp:
    • DUCATI 944 SUPER TOURING (98-)
    • SUZUKI 944 ST2 (97-03)
    • APRILIA GSX400 Impulse (99-00) (05-) Brembo 2pin
    • bimota DORSODURO 1200 (11)
    • Others SB8 1000R (98-)
    • ...và hơn thế nữa.
    đăng Nov 6, 2017STREET strongest
    Unlike other Brake Pads, you can feel the goodness of effect clearly.Characteristic is strongly effective from the earliest times of handfuls, so some familiarity may be necessary.I used TYPE-C, but t...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA YZF-R1 SP (2006)
    • APRILIA YZF-R1 (2002) Genata
    • Others YZF-R1 (2014) Zero
    • BMW YZF-R1 (2015) CCM
    • BENELLI RS125 (2003) CF MOTO
    • ...và hơn thế nữa.
    When we arrived, it was already floating from release paper.It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will fl...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB1300SB 10-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • KAWASAKI VTR250 03-07 (MC33-1020001-) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * Please increase the bar end and install it in a feeling.
    • YAMAHA FTR223 (No side batches) * Required switch hole drilling / * Clutch cable · It is necessary to change handling of choke cable.
    • SUZUKI CB400SF VTEC Revo (NC42) 08-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB400SF VTEC 99-07 (NC39) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    Bởi Marc G JH (3)TừUnited States
    Reasonably priced item. Seems a fraction bigger than the stock parts. As a result the switch housings and riser clamps appear to have more of a gap between them after installing this bar. The paint al...Đọc thêm
  • MỚI
    Phù hợp:
    • BMW K1300GT 09 For rear use
    • DUCATI SCRAMBLER FULL THROTTLE 15-17 For rear use
    • HONDA SCRAMBLER ICON 16-17 For rear use
    • KAWASAKI SCRAMBLER CLASSIC 16 For rear use
    • YAMAHA SCRAMBLER Limited Edition/Italia Independent 17 For rear use
    • ...và hơn thế nữa.
    đăng Nov 4, 2017Tire you want to try it.
    19in. And 18 in. Although Continental often hear good evaluation, 17in. I tried putting in what kind of things, but it is a ride that I have never experienced before.. Feeling that Tire is rolling lig...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA TDM900 02-14
    • SUZUKI YZF 600 Thundercat 96-02 Fitting for monorail 517F (94035) * European name is GSX 750
    • BMW Inazuma 750 98-02 Fitting for monolack 355F (61091) *5UXB- (06 / 11 -) is impossible
    • MOTOGUZZI XJR1300 / SP (Cab) <5UX3-9> 03 / 2-06 Monolack fitting 341 F (90143) *5UX3- (03 / 2 -) is not possible
    • KAWASAKI XJR1300 (Cab) 98-02 Fitting for monorail 361F (66626) *XJR1300C (16-) Is not possible
    • ...và hơn thế nữa.
    đăng Nov 3, 2017Design is good.
    It is a replacement from Mono-lock. I think the product design is better than Mono-lock.There is almost no case to remove the Case mostly now.Depending on the shape difference with Mono-lock "Sna...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB750 [RC42] 2005 【Frame No. 】 RC42-1500001 or later
    • SUZUKI CB750 [RC42] 2006 【Frame No. 】 RC 42-1600001 to 1699999
    • CB750 [RC42] 1999 【Frame No. 】 RC 42-1100001 to 1149999
    • CB750 [RC42] 2004 【Frame No. 】 RC42-1350001 to 1399999
    • CB750 [RC42] 2003 【Frame No. 】 RC42-1250001 to 1299999
    • ...và hơn thế nữa.
    đăng Nov 1, 2017Cost performance OK
    I used it for GN125H.OEM's Rubber hose which I have used without changing it even once for 12 years, the appearance was beautiful, but when I grasped the Brake lever strongly the whole Hose expand...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA XSR900 16-17 for Rear
    • DUCATI XSR700 17
    • BMW SuperSport 17
    • TRIUMPH SCRAMBLER MACH2.0 17
    • HONDA R nineT Racer 17
    • ...và hơn thế nữa.
    đăng Oct 28, 2017Just Sports touringTire
    Although it is an exchange from T30, after the replacement, the falling down falls suddenly than before.I felt I was going to beat T30, but it is possible to defeat Hirahira without it.Because the Gri...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB400SF VTEC III (NC39) 99-07 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • KAWASAKI CB400SF VTEC 99-07 (NC39) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • YAMAHA ZEPHYR750 [Zephyr] RS -98 (NC31) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • SUZUKI CB400SF 96-99 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZRX400 II -12 (Drum brake car) *APE100 (09-) Only
    • ...và hơn thế nữa.
    Although I am on VTR Injection, I did not like the Up position of OEMHandlebar I was doing swallow handle but I wanted to ride with a more comfortable posture I bent the Handlebar because of falls, VT...Đọc thêm
  • MỚI
    Phù hợp:
    • BMW K1100R
    • MOTOGUZZI CALIFORNIA II
    • DUCATI ST4
    • KAWASAKI MONSTER800
    • SUZUKI MMONSTER1000 [monster] / S
    • ...và hơn thế nữa.
    đăng Oct 24, 2017Maybe lining is car-friendly
    YZF-R1 (2013) In use.As you can see in the item description, the color of the hole through which the key can pass is divided so it is hard to make a mistake in the front and back.This is saved to the ...Đọc thêm
  • MỚI
    Phù hợp:
    • KAWASAKI Epsilon250 HID type : H4
    • SUZUKI D-Tracker HID type : H4-D(hi / low)
    • YAMAHA GSX1200 Inazuma
    • HONDA GS1200SS 01-02
    • DUCATI ZZR1100D
    • ...và hơn thế nữa.
    đăng Oct 19, 2017It is a pretty good one.
    I installed it in the old car of the 1980s. Even at night it was very bright and easy to see. The light scattering method at the time of Low beam is not very good. (It seems like it gets dazzled when ...Đọc thêm
  • MỚI
    Phù hợp:
    • KAWASAKI ZEPHYR1100 /RS 92-06
    • YAMAHA GPZ900R NINJA 91-03
    • ZRX1200DAEG [Daegu] 97-14
    • ZRX1200 /R /S 97-14
    • ZZR1100 ZX-11 97-01
    • ...và hơn thế nữa.
    I attached it to Daegu but I like the color and texture I feel like Don Pissha.But the prices are still good. - - -It seems that it got lighter when using the clutch. Installation was easy, quick turn...Đọc thêm
  • MỚI
    Phù hợp:
    • KAWASAKI Eliminator 900 (All Years)
    • HONDA CB450 (All Years)
    • SUZUKI GPZ400F (All Years)
    • YAMAHA GPZ400 (All Years)
    • Z750S (All Years)
    • ...và hơn thế nữa.
    đăng Oct 18, 2017Easy to use
    A bit thick, easy to use ♪ slippery and slim small groovesI think that hands are hard to hurt even for a long time.I also think I will purchase this Grip next.Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA MT-09 TRACER 15-16 【M7 base (91332) + special rack SR2122 (92338)】 * 17 model (Assist & slipper clutch standard adopted car) It is unconfirmed whether or not it can be attached to
    • APRILIA SHIVER 750/ABS 10-15 【M5 base (90140)】
    • TRIUMPH SRV850 12-16 【M7 base (91332)】
    • SUZUKI XJR1300 (FI) <5UXB-> 07-15 【M5 base (90140) + special rack SR 6708 (91708)】
    • KTM MANA 850/GT 08-15 【M3 base (90090) + monorail fitting 361F (66626)】 *XJR1300C (16-) Is not possible
    • ...và hơn thế nữa.
    At first I thought that Large was too good, but it is very convenient to use.Since the direction of the key is fixed, it may be more convenient if it is designed to get stuck upside down.Đọc thêm
Sản phẩm đã xem
loading