TẠI SAO ?

CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN

COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI

DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ

* Cửa hàng TỐT NHẤTDUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản.
* Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác!
* Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.

HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!

Chúc mừng bạn! Tài khoản mới của bạn đã được tạo! Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi. Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.

Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.

Đăng ký xe máy của bạn để gia nhập Webiker!
Về dịch vụ "Góc Webiker" của chúng tôi
"TÌM KIẾM DỄ DÀNG"
Bạn có thể tìm kiếm những mặt hàng phù hợp với xe máy của bạn một cách dễ dàng!
"THÔNG TIN CÓ GIÁ TRỊ"
Bạn có thể nhận được những thông tin có giá trị,
ví dụ như: giảm giá đặc biệt, những sản phẩm mới và hơn thế nữa!
"ĐĂNG KÝ DỄ DÀNG"
Bạn có thể đăng ký một cách dễ dàng! Chỉ cần thông tin của
nhà sản xuất xe máy, tên và năm của đời xe!
Tất cả điều kiện
749 Đánh giá Xem dạng:
  • MỚI
    Phù hợp:
    • HONDA VTR250
    • KAWASAKI XR250 MOTARD
    • SUZUKI V-TWINMAGNA Type 2
    • YAMAHA PS250 Type1
    • JADE RS
    • ...và hơn thế nữa.
    đăng Dec 10, 2017bad quality
    Bởi NO NAME (1)TừHong Kong
    very bad quality...
    the product seem like a china second hand mirror ...
    i will not install it on my bike...cant accept it Đọc thêm
  • MỚI
    Phù hợp:
    • KAWASAKI W400 * Required switch hole drilling
    • SUZUKI GRASS TRACKER BIGBOY 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
    • HONDA RV200 VANVAN -07 (NH41A) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • YAMAHA GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • FTR223 (With side basket) * Required switch hole drilling
    • ...và hơn thế nữa.
    đăng Dec 7, 2017Position became very easy!
    I bought CB 1000 for 1 year, I was suffering from low distant Handlebar all the time, but I chose to make it an Up Handle.Wire was 10 cm Long, Brake & Clutch hose was extended kit 10 cm of DAYTONA...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA XVZ12TD (83-) Required number : 4
    • bimota XZ400 / D (82-) Required number : Two VMAX (90. 1-08) 3UF required number : 4
    • TRIUMPH YF400M-FW (4 wheel buggy) (94-98) Required number : Two VMAX (85-89) Required number : 4
    • Others YF350E (4 wheel buggy) Required number : One Universal
    • SUZUKI XZ550D (81-) 30R required number : Two Z250LTD belt drive (84-) Z250P required number : Two
    • ...và hơn thế nữa.
    đăng Dec 7, 2017Good feeling
    Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA RZ50 (5FC1-2) 98-00 : TZ50 (3XM1) 90 : TZR50(3TU / 4EU) 90-97 : TZR50R(3TU / 4EU) 90-97 : TZM50R (4KJ1-3) 94-97 : DT125R(34X / 3FW1-9) 85-97 : TZR125(2RM / 2UT / 3TY1 / 2 / 4) 87-88 91-94 : SDR200 (2TV) 87 : TW200 (disk) (5LB1-2) 00-01 : TW225 (5VC1-4) 02-05 : TT225 (1RH) 86 : SEROW225 [Sero] (1KH / 2LN / 3RW / 4JG / 5MP) 86-00 : SEROW225 [Sero] W(1KH / 2LN / 3RW / 4JG / 5MP) 86-00 : SEROW225 [Sero] WE(1KH / 2LN / 3RW / 4JG / 5MP) 86-00 : BRONCO [Bronco] (ST225) 5BT1 97 : XG250 TRICKER [Tricker] (5XT1-2) 04-05 : RZ250R (29L) 84 : TZR250(1KT / 2AW / 2XT1) 85-88 : TZR 250 Marlboro (1KT / 2AW / 2XT1) 85-88 : TZR 250 Yamaha Black (1 KT / 2AW / 2XT1) 85-88 : TZR250 (Rear exhaust) 3MA1 89 : MAJESTY250 [Majesty] (4HC) (Rear drum) 95-99 : MAJESTY250 [Majesty] (4HC) 97-05 : MAJESTY250 [Majesty] (SG03J) ABS 97-05 : MAJESTY250 [Majesty] (SG03J) C (Rear disc) 97-05 : RZ350R (29K) 83 : XJ400(ZE / ZS / Z)33M / 35J / 53U 83-85 : XJ750 (XJ750E-2) 29R 83 :
    【What made you decide the purchase?】 Short lever is expensive but it is inexpensive and short.【How was it actually used?】 It fits neatly into the Pud Guard of Mad Max and does not interfere as tailore...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA MAJESTY250 / C / ABS (95. 8-07) SG03J Required number : One
    • SUZUKI TU 125 XT Required number : One
    • KAWASAKI GRASS TRACKER (00. 4-04. 4) NJ 47 A required number : One
    • bimota VOLTY Type I / II / C / T (94. 11-) NJ 47 A required number : One
    • BETA TT-R230 (07-) Required number : One
    • ...và hơn thế nữa.
    đăng Nov 20, 2017BrandNGK of the world ??
    Since it is a consumable item, we have exchanged it when we ran from 4000 to 5000 km. Because my motorcycle is air-cooled 4 shots, be sure to replace regularly! Always Quantity : 1 Set (Four) We are k...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA APE100 -12 (Drum brake car) *APE100 (09-) Only
    • SUZUKI ST250 required switch hole drilling
    • KAWASAKI GRASS TRACKER BIGBOY -07 (NJ4AA) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • YAMAHA BALIUS -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable · Clutch cable · Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • TW200 E -99 (Drum brake car) 91-94 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    đăng Nov 18, 2017I am cool
    After all the gap with Tank becomes strict. I feel a little pinching my thumb. After that, it was a miscalculation to interfere with Front Initial Adjuster. Mirror also did not meet the angle and it w...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA APE100 -12 (Drum brake car) *APE100 (09-) Only
    • SUZUKI ST250 required switch hole drilling
    • KAWASAKI GRASS TRACKER BIGBOY -07 (NJ4AA) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • YAMAHA BALIUS -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable · Clutch cable · Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • TW200 E -99 (Drum brake car) 91-94 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    đăng Nov 18, 2017I am cool
    Handlebar Lock can be done, but the thumb slightly caught in the end of cutting. Since it interferes with the Front Initial Adjuster, it had to be closed to hide the angle of the droop angle. Mirror&#...Đọc thêm
  • MỚI
    Phù hợp:
    • SUZUKI GSR400 -12 * Required switch hole drilling / * Normal can be used for side cap.
    • KAWASAKI ZEPHYR750 [Zephyr] RS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • HONDA ZEPHYR 400 x [Zephyr] 96-99 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • YAMAHA ZEPHYR1100 -04 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * With cowl Model 05 or later interfere with the cowl and can not be installed.
    • BALIUS [Barrios] II -07 (NH41A) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • ...và hơn thế nữa.
    đăng Nov 14, 2017To w650 Up Handlebar
    I was on the w650 OEMUp Handlebar, but the posture became upright, all the input from the road surface became Damage to the spine.After making this Handlebar, the wind on the highway no longer cared a...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB400SS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • KAWASAKI CB1300SF 03-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • SUZUKI CB750 (RC42) 04- * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • YAMAHA ESTRELLA [Estrea] RS Custom 96-99 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB1300SB 05-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    đăng Nov 12, 2017This is the limit.
    Since it was 163 cm and Small handle, I felt Handlebar was a bit far and low, so I exchanged it. Harness and Wire had plenty of time, but since Brake hose was feeling Limit even at NORMAL, I searched ...Đọc thêm
  • MỚI
    Phù hợp:
    • YAMAHA SR400
    • HONDA TW225 FI
    • PGO TW200 2
    • SYM TMAX ZX
    • KYMCO MAXAM CF50
    • ...và hơn thế nữa.
    Used for SR 400. Axel side does not match, it was impossible to process Throttle considerably. What is conformity? It is better not to purchase!Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB900F (All Years)
    • KAWASAKI CB500T (All Years)
    • SUZUKI CB400SF (All Years)
    • YAMAHA CB500Four (All Years)
    • CB1100 (All Years)
    • ...và hơn thế nữa.
    đăng Nov 10, 2017I think it's good.
    Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.Minus surface : Grip becomes thick (About Grip heater in...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA NC700X 12 (Excluding DCT car) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • YAMAHA CB1300SB 10-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * Change of handling of brake hose is required.
    • SUZUKI TW200 E -99 (Drum brake car)
    • KAWASAKI GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • CB400SS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    đăng Nov 7, 2017Good Position
    The width of the Handlebar at the time of purchase was too wide for me, so it was a dimension that Mirror could not install and it was a replacement.I tried about 3 kinds including junk, but none of t...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB1300SB 10-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • KAWASAKI VTR250 03-07 (MC33-1020001-) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * Please increase the bar end and install it in a feeling.
    • YAMAHA FTR223 (No side batches) * Required switch hole drilling / * Clutch cable · It is necessary to change handling of choke cable.
    • SUZUKI CB400SF VTEC Revo (NC42) 08-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB400SF VTEC 99-07 (NC39) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ...và hơn thế nữa.
    Bởi Marc G JH (3)TừUnited States
    Reasonably priced item. Seems a fraction bigger than the stock parts. As a result the switch housings and riser clamps appear to have more of a gap between them after installing this bar. The paint al...Đọc thêm
  • MỚI
    Phù hợp:
    • SUZUKI GRASS TRACKER BIGBOY -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable · Clutch cable · Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • YAMAHA TW200 -99 (Drum brake car)
    • HONDA MONKEY 84-07 (Z50J-1600008-
    • KAWASAKI SR500 AB27-1000001-1899999) * Top bridge with H30 holder
    • GRASS TRACKER or MONKEY handle holder
    • ...và hơn thế nữa.
    đăng Nov 3, 2017It is good !!
    I thought that I wanted to replace the wide Handlebar,In the same way I thought Tsumaranai and chose this Handlebar.As a result it is not hard for things that have become somewhat forward-lookingI am ...Đọc thêm
  • MỚI
    Phù hợp:
    • TRIUMPH STREET TRIPLE
    • KTM STREET TRIPLE 85
    • MOTOGUZZI STREET TRIPLER
    • SUZUKI DAYTONA 675
    • KAWASAKI DAYTONA 675 R
    • ...và hơn thế nữa.
    Feeling of useAs expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.However, it is fixed more...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA TLM220R
    • KAWASAKI KDX125 SR BAJA
    • SUZUKI KDX220 SR VTEC
    • YAMAHA KDX200 SR
    • KDX250 SR
    • ...và hơn thế nữa.
    đăng Oct 31, 2017very good
    Although I bought Blinker with 4 pieces 1000 yen + shipping fee at a certain OakitionAll the balls went out on that day, I broke 1 pc.Product and texture I bought this time will not change, but this i...Đọc thêm
  • MỚI
    Phù hợp:
    • Others Spoke wheel bike in general
    • YAMAHA DRAGSTAR 1100
    • HONDA DRAGSTAR 1100 classic
    • SUZUKI DRAGSTAR 400
    • KAWASAKI DRAGSTAR 400 CLASSIC
    • ...và hơn thế nữa.
    đăng Oct 29, 2017Mounting not
    Purchased for SR 400's Spoke's degradation concealed.Although Rear could be installed, the Front is overlapped with Spoke, so it is not very, but it can not be installed.Well, I did not check ...Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB400SF VTEC III (NC39) 99-07 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • KAWASAKI CB400SF VTEC 99-07 (NC39) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • YAMAHA ZEPHYR750 [Zephyr] RS -98 (NC31) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • SUZUKI CB400SF 96-99 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZRX400 II -12 (Drum brake car) *APE100 (09-) Only
    • ...và hơn thế nữa.
    Although I am on VTR Injection, I did not like the Up position of OEMHandlebar I was doing swallow handle but I wanted to ride with a more comfortable posture I bent the Handlebar because of falls, VT...Đọc thêm
  • MỚI
    Phù hợp:
    • KAWASAKI Eliminator 900 (All Years)
    • HONDA CB450 (All Years)
    • SUZUKI GPZ400F (All Years)
    • YAMAHA GPZ400 (All Years)
    • Z750S (All Years)
    • ...và hơn thế nữa.
    đăng Oct 18, 2017Easy to use
    A bit thick, easy to use ♪ slippery and slim small groovesI think that hands are hard to hurt even for a long time.I also think I will purchase this Grip next.Đọc thêm
  • MỚI
    Phù hợp:
    • HONDA CB1300SF (All Years)
    • KAWASAKI CB1300SB (All Years)
    • SUZUKI CB1300ST (All Years)
    • YAMAHA Z750Four (All Years)
    • Z900 (All Years)
    • ...và hơn thế nữa.
    Bởi T T (6)TừThailand
    เป็นปลอกแฮนด์ที่สวยมาก เนื้อวัสดุที่มีคุณภาพ การออกแบบที่ดี ขั้นตอนในการใส่เพียง 1-2 ขั้นตอนก็เรียบร้อย เหมาะกับการใช้งานที่หลากหลายทั้งทางใกล้และการเดินทางไกล ช่วยลดการสั่นสะเทือนในขณะขับขี่ กระชับเว...Đọc thêm
Sản phẩm đã xem
loading